Yapalong
ICON
ICON 0
  • Your shopping cart is empty!

How to Replace Antenna

Step1 Open the front case by removing the 4 screws from the back of the radio.

 

Step2 Unplug the antenna cable shown gently from circuit board

 

Step3 Pry out antenna gently using a screw driver

 

Step4 Install the new antenna. Gently hammer the brass base of the antenna until it sits firmly

 

Step5 Reverse the previous steps to reinstall the radio.

Bend the root of the antenna left, right, front and back once each direction slowly, at about 80 degrees. This operation is to prevent the snap of antenna cover under impact.

 

Done!